Custom Applications for Genuine Bullet Proof Steering Systems

DESIGNED - MANUFACTURED
ASSEMBLED & PACKAGED
IN THE U.S.A.
262-673-4077

the One and Only
Genuine...

* NEW * NEW *

Upgrade to our new Stage-2 Extreme Duty "Platinum" Rod Ends!
Chromemoly super strong rod ends for maximum durability and performance
add $15 per rod end
(retail= 40.00)

Add a Close Quarters Formed Bend in your drag link tubing to normalize rod end misalignment on extreme angle steering applications.
starting at $89.00

Race Proof Tubing upgrade for Ford style Track Bars!
Add the larger and stronger 1.38" OD & 3/8" Race Proof tubing to your track bar order. Clearance needs to be checked in advance by purchaser.
starting at $79.00

Installation Drill Kit
3/4" Drill bit with reduced 1/2" shank for drilling your knuckles and pitman arm to install our steering
$19.00 (retail= 34.00)

Add the look of CHROME to your components!
"Chrome-coat" powder coating option. The look of chrome with the durability of powder coat. Includes special polishing of the tube prior to the "Chrome-coat" application
add $49 per tube

CUSTOM APPLICATIONS


	We can make almost anything that is feasable to your specific needs and specifications. All you have to do is supply detailed measurements and the way to need it to function, and we can take a serious look at it and see what we can come up with. Please be prepared with all necessary information and specific measurements such as those listed on the Measurements page from the link on the main page on this site. Contact us at 262-673-4077 (central time)


	10am-8pm Mon & Thu 10am-6pm Tue-Wed-Fri Or Email us at:

CURRENT TIME & TEMP AT
OUR MANUFACTURING FACILITY


	NOTE: For Custom bent bars… We can bend tubes to your specifications as long as they meet the minimum bend allownaces of our bending machine. Send in a sample for us to look over and use as a template to bend your custom tubes… 1. Bend a piece of brake line to form the exact shape and length desired 2. Keep the number of bends to a minimum and as gentle as possible. 3. Then take a piece of electrical conduit 1" dia and re-create that form so it will not be deformed in shipment. 4. Either weld or epoxy washers on the end to simulate the eyelets. this is not necessary but it helps 5. Carefully pack and send in your creation and we will take it from there. 6. Inform us of the exactness needed in re-creating this shape. There are mechanical limitations of the bender as well as physical limitations of the tubing being used, so the end product may differ from the template provided. 7. The customer is responsible for all engineering and strength considerations of their creation


	The purchaser is solely responsible for all correct measurements, clearance, fitment and feasibility considerations. There are no returns on incorrectly provided specifications or measurements. Replacement costs are the sole responsibility of the purchaser.